Field IECEx Inspector
Job Fit Check
Base Career helps you apply smarter for this job.
Key skills for this role
About the Role
Apex Tech seeks a Field IECEx Inspector for a full-time role based in Riyadh, Saudi Arabia, with project site in Durma. The inspector performs hands-on inspection of hazardous area electrical and instrumentation installations in compliance with IEC standards.
Key Skills for This Role
Responsibilities
- Perform Visual (V) and Close (C) grade inspections in accordance with IEC 60079 17:2023
- Support Detailed (D) grade activities as directed by Lead and Senior Inspectors
- Study the project Hazardous Area Classification drawing for all assigned areas
- Notify the Lead Inspector immediately of any discrepancy observed between the HAC drawing and site conditions
- Perform all inspection activities strictly in accordance with the approved Inspection & Test Plan (ITP)
- Photograph all findings using IS rated cameras and record observations on the standard inspection record form
- Identify and report any non conformance observed during inspection immediately to the Lead or Senior Inspector
- Complete all inspection record forms accurately and legibly and submit within the same working day
- Use only assigned calibrated instruments and Ex rated/IS tools for all inspection activities
- Never enter any classified zone without a valid Permit to Work, an active calibrated personal gas detector, and an active buddy
Requirements
- Minimum 3 years in E&I inspection, installation, or quality control across oil & gas, petrochemical, or power generation sites
- Diploma or bachelor’s degree in Electrical, Electronic, or Instrumentation Engineering or equivalent
- CompEx Ex01–04 (gas/vapor) or IECEx CoPC Units 003/007 minimum — required, current, unrevoked, and independently verifiable
- English – must read, write and complete technical documents in English
- Valid & Transferable Iqama
Full Job Posting
About the Role
- The Field IECEx Inspector performs hands on inspection of hazardous area electrical and instrumentation installations under the technical direction of the Lead IECEx Inspector.
- This role executes Visual (V) and Close (C) grade inspections in accordance with IEC 60079 17:2023, supports Detailed (D) grade activities, and maintains accurate inspection records for every classified hazardous area assigned.
- The initial deployment covers the PP12 Expansion CCGT IPP Project (1,800 MW, Durma, KSA) — spanning 14 classified hazardous areas from Zone 0 to Zone 2, covering natural gas, hydrogen, and diesel oil hazard categories.
Key Responsibilities
- Study the project Hazardous Area Classification drawing for all assigned areas — understand zone boundaries, gas groups, and temperature classes before commencing any inspection.
- Notify the Lead Inspector immediately of any discrepancy observed between the HAC drawing and site conditions.
- Attend the daily technical briefing conducted by the Lead Inspector — confirm understanding of the planned areas, applicable ITP activities, and safety controls for the day.
- Review relevant equipment certificates and cable schedules for assigned areas before entering the field.
- Perform all inspection activities strictly in accordance with the approved Inspection & Test Plan (ITP) apply the correct inspection grade (Visual, Close, or Detailed) as designated for each activity.
- Never perform an inspection activity outside the assigned ITP scope or personal certified competency without prior written instruction from the Lead Inspector.
- Follow all approved SOPs for inspection activities including cable gland inspection, conduit sealing checks, earthing continuity verification, and enclosure integrity checks.
- Report any SOP ambiguity or site condition not covered by the SOP to the Lead Inspector before proceeding.
- Perform Visual (V) grade inspections — equipment nameplate verification, zone signage checks, enclosure integrity checks, cable entry and gland visual checks, and labelling/marking verification.
- Photograph all findings using IS rated cameras and record observations on the standard inspection record form.
- Perform Close (C) grade inspections using calibrated tools — cable gland tightness checks, gland to cable compatibility verification, bolt and fastener checks, and conduit sealing fitting checks.
- Use only Ex rated or non sparking tools when working within classified zone boundaries.
Qualifications
- Minimum 3 years in E&I inspection, installation, or quality control across oil & gas, petrochemical, or power generation sites.
- Prior inspection or installation work on Combined Cycle Gas Turbine power plants is an advantage.
- Diploma or bachelor’s degree in electrical, Electronic, or Instrumentation Engineering or equivalent.
- CompEx Ex01–04 (gas/vapor) or IECEx CoPC Units 003/007 minimum — required. Certificate must be current, unrevoked, and independently verifiable.
- CompEx Ex11 (mechanical) or additional IECEx CoPC units, OPITO BOSIET with EBS and OPITO Basic H2S training. K3/HSE certification an advantage.
- English – must read, write and complete technical documents in English.
- Valid & Transferable Iqama required.
Apply for this job in 1 click
Skip the repetitive application forms
Install the Base Career Chrome Extension and autofill job applications across major job boards with your profile.
Trusted by over 500,000 job seekers on Base Career
More from this employer
More jobs at Apex Tech
Multi-Skilled FM Technician
Riyadh, KSA
APEX Tech is hiring a Multi-Skilled FM Technician for facilities maintenance across client sites in Riyadh. The role involves electrical, plumbing, HVAC, and general building maintenance, performing PPM and reactive repa
Senior Field IECEx Inspector
Riyadh, KSA
Apex Tech is seeking a Senior Field IECEx Inspector to lead hazardous area electrical and instrumentation inspections at a CCGT power plant in Durma, Saudi Arabia. The role requires CompEx Ex01-04 or IECEx CoPC certifica
Technical Lead – CCGT & IECEx Specialist
Riyadh, KSA
Technical Lead – CCGT & IECEx Specialist Location: Riyadh, Saudi Arabia Company: Apex Tech Apex Tech is seeking a highly experienced Technical Lead to oversee critical inspection and compliance activities for a major pow
Multi Skilled Field Technical Supervisor
Riyadh, KSA
Job Title: Multi Skilled Field Technical Supervisor Department: Operations – Hard Services & Maintenance Location: Riyadh, Saudi Arabia Employment Type: Full-Time, Permanent Experience Required: Minimum 8 years in FM