Electronics Technician II
Role Overview
The Federal Aviation Administration (FAA) awarded the Technical Support Services Contract 5 (T5) to Parsons in April 2023.
Parsons is the prime contractor.
This $1.8+ billion contract has a 4-year base period with two 3-year options.
The statement of work includes a variety of activities that support the FAA’s Capital Investment Plan (CIP) and certain reimbursable programs, the FAA NextGen Program, national security programs and aviation safety.
Specifically, work includes site selection and engineering, construction, environmental and fire/life safety, equipment installation and testing, drafting, contract surveillance, and other technical services as required.
Work is performed across the nation in each of the FAA’s nine regions as well as the Aeronautical Center in Oklahoma City, Oklahoma, and the Technical Center in Atlantic City, New Jersey and in several U.S. territories.
An average staff of 500 with a peak staff over 650 supports this contract, in addition to those subcontractors who perform construction work.
The SCA – Electronics Technician serves as an experienced field technician supporting the Federal Aviation Administration (FAA) under the TSSC-5 contract.
This position performs installation, modification, testing, troubleshooting, repair, and preventive maintenance on a variety of electronic systems and equipment that support the National Airspace System (NAS).
The Electronics Technician III works under limited supervision, following established procedures, technical documentation, and FAA directives.
The technician may work independently on routine or moderately complex tasks and supports senior technicians or engineers on more complex systems and activities.
Perform installation, relocation, and removal of electronic systems and equipment, which may include:
Navigation aids (NAVAIDS)
Communications systems (VHF/UHF, data/voice)
Surveillance and support systems
Associated power, grounding, and control equipment
Troubleshoot and repair systems to the unit, board, or module level as assigned:
Use standard test equipment (digital multimeters, signal generators, oscilloscopes, etc.)
Follow step-by-step troubleshooting guides, fault isolation procedures, and technical manuals
Escalate complex or recurring issues to crew lead, FAA counterparts, and project management.
Read and work from:
Schematics, wiring diagrams, and interconnect drawings
Equipment manuals, technical orders, and job plans
FAA orders, work instructions, and site-specific procedures
Assist in field installations and site work under TSSC‐5:
Support pre-installation checks and site preparation
Install racks, cabinets, and equipment per drawings and installation standards
Route, terminate, label, and test cables (coax, fiber, copper) under guidance
Assist with system power-up, basic alignment, and functional testing
Use and care for test and measurement equipment:
Configure and operate standard electronic test instruments
Perform basic measurements, alignments, and performance checks
Maintain proper calibration and handle equipment in accordance with procedure
Document work activities in accordance with contract and FAA requirements:
Complete maintenance logs, service tickets, and test forms
Record parts used, corrective actions taken, and test results
Provide redline/as-built information to senior technicians or engineers
Follow all safety, security, and quality practices:
Comply with FAA and Parsons safety policies, OSHA regulations, and site Risk Management Plans
Adhere to physical and information security requirements at FAA facilities
Follow configuration control and quality assurance procedures
Collaborate effectively with senior technicians, engineers, project managers, and FAA representatives to support project objectives.
Full Job Posting
In a world of possibilities, pursue one with endless opportunities.
Imagine Next!
At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself.
Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential.
Unleash your talent and redefine what’s possible.
Job Description
The Federal Aviation Administration (FAA) awarded the Technical Support Services Contract 5 (T5) to Parsons in April 2023.
Parsons is the prime contractor.
This $1.8+ billion contract has a 4-year base period with two 3-year options.
The statement of work includes a variety of activities that support the FAA’s Capital Investment Plan (CIP) and certain reimbursable programs, the FAA NextGen Program, national security programs and aviation safety.
Specifically, work includes site selection and engineering, construction, environmental and fire/life safety, equipment installation and testing, drafting, contract surveillance, and other technical services as required.
Work is performed across the nation in each of the FAA’s nine regions as well as the Aeronautical Center in Oklahoma City, Oklahoma, and the Technical Center in Atlantic City, New Jersey and in several U.S. territories.
An average staff of 500 with a peak staff over 650 supports this contract, in addition to those subcontractors who perform construction work.
The SCA – Electronics Technician serves as an experienced field technician supporting the Federal Aviation Administration (FAA) under the TSSC-5 contract.
This position performs installation, modification, testing, troubleshooting, repair, and preventive maintenance on a variety of electronic systems and equipment that support the National Airspace System (NAS).
The Electronics Technician III works under limited supervision, following established procedures, technical documentation, and FAA directives.
The technician may work independently on routine or moderately complex tasks and supports senior technicians or engineers on more complex systems and activities.
Perform installation, relocation, and removal of electronic systems and equipment, which may include:
Navigation aids (NAVAIDS)
Communications systems (VHF/UHF, data/voice)
Surveillance and support systems
Associated power, grounding, and control equipment
Troubleshoot and repair systems to the unit, board, or module level as assigned:
Use standard test equipment (digital multimeters, signal generators, oscilloscopes, etc.)
Follow step-by-step troubleshooting guides, fault isolation procedures, and technical manuals
Escalate complex or recurring issues to crew lead, FAA counterparts, and project management.
Read and work from:
Schematics, wiring diagrams, and interconnect drawings
Equipment manuals, technical orders, and job plans
FAA orders, work instructions, and site-specific procedures
Assist in field installations and site work under TSSC‐5:
Support pre-installation checks and site preparation
Install racks, cabinets, and equipment per drawings and installation standards
Route, terminate, label, and test cables (coax, fiber, copper) under guidance
Assist with system power-up, basic alignment, and functional testing
Use and care for test and measurement equipment:
Configure and operate standard electronic test instruments
Perform basic measurements, alignments, and performance checks
Maintain proper calibration and handle equipment in accordance with procedure
Document work activities in accordance with contract and FAA requirements:
Complete maintenance logs, service tickets, and test forms
Record parts used, corrective actions taken, and test results
Provide redline/as-built information to senior technicians or engineers
Follow all safety, security, and quality practices:
Comply with FAA and Parsons safety policies, OSHA regulations, and site Risk Management Plans
Adhere to physical and information security requirements at FAA facilities
Follow configuration control and quality assurance procedures
Collaborate effectively with senior technicians, engineers, project managers, and FAA representatives to support project objectives.
What Required Skills You'Ll Bring
High school diploma is required.
May require repetitive movement such as lifting up to 50 lbs., bending, and standing.
Basic Microsoft suite and Internet, and E-mail.
Must be able to meet customer security requirements.
A background check by federal authorities will be performed.
Must be able to travel up to 100% within the USA.
Five plus years of working knowledge of:
Basic analog and digital electronics
Fundamentals of RF and communications equipment
Use of standard electronic test equipment (DMMs, basic scopes, signal generators)
Ability to:
Read and interpret basic schematics, wiring diagrams, and technical documentation
Follow written and verbal instructions and standard procedures
Work safely in field, shop, and facility environment
None
This position is part of our Federal Solutions team.
The Federal Solutions segment delivers resources to our US government customers that ensure the success of missions around the globe.
Our intelligent employees drive the state of the art as they provide services and solutions in the areas of defense, security, intelligence, infrastructure, and environmental.
We promote a culture of excellence and close-knit teams that take pride in delivering, protecting, and sustaining our nation's most critical assets, from Earth to cyberspace.
Throughout the company, our people are anticipating what’s next to deliver the solutions our customers need now.
We value our employees and want our employees to take care of their overall wellbeing, which is why we offer best-in-class benefits such as medical, dental, vision, paid time off, 401(k), life insurance, flexible work schedules, and holidays to fit your busy lifestyle!
Parsons is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status or any other protected status.
We truly invest and care about our employee’s wellbeing and provide endless growth opportunities as the sky is the limit, so aim for the stars!
Imagine next and join the Parsons quest—APPLY TODAY!
Parsons is aware of fraudulent recruitment practices.
To learn more about recruitment fraud and how to report it, please refer to https://www.parsons.com/fraudulent-recruitment/.
About Parsons
Apply for this job in 1 click
Skip the repetitive application forms
Install the Base Career Chrome Extension and autofill job applications across major job boards with your profile.
Trusted by over 500,000 job seekers on Base Career
More from this employer
More jobs at Parsons
HSE Manager
Riyadh, KSA
Parsons is seeking an HSE Manager to lead health, safety, and environmental programs across project activities. Candidates need 7–10 years of related HSE management experience, a relevant bachelor’s degree or equivalent
Team Coordinator (Saudi National)
Riyadh, KSA
Parsons seeks a Team Coordinator to maintain project plans, schedules, budgets, and documentation while supporting stakeholder meetings and project strategy. The role requires a bachelor's degree or diploma, 0-3 years of
Project Coordinator (Saudi National)
Riyadh, KSA
Parsons seeks a Project Coordinator to support project managers by organizing schedules, tracking progress, managing documentation, and coordinating communication so construction projects are delivered on time, within bu
HSE Manager
, KSA
In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of v
Project Coordinator (Saudi National)
, KSA
In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of v
Associate Architect -Tamkeen Program (Saudi National)
, KSA
In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of v
Associate Mechanical Engineer - Tamkeen Program (Saudi National)
, KSA
In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of v
Lead Field Engineer – Electrical (Saudi National)
, KSA
In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of v
HSE Manager
Riyadh, KSA
Team Coordinator (Saudi National)
Riyadh, KSA
Project Coordinator (Saudi National)
Riyadh, KSA
HSE Manager
, KSA
Project Coordinator (Saudi National)
, KSA
Associate Architect -Tamkeen Program (Saudi National)
, KSA
Associate Mechanical Engineer - Tamkeen Program (Saudi National)
, KSA
Lead Field Engineer – Electrical (Saudi National)
, KSA