{bc}
Apply
workday

Electrical Engineering Co-Op, Spring 2027

Johnson & Johnson
Cincinnati, USA
Full-time
Intern
Onsite
Discovered 3 weeks ago
matlabpythonsas

Full Job Posting

Responsibilities:

  • As an Electrical Engineering Co-op at Ethicon, you will have the chance to:
  • Be a contributing member to one of our teams developing: electrical and electromechanical surgical instruments, surgical robotics, electronic operating room equipment, or systems for automated data acquisition, analysis, and visualization
  • Use state of the art tools to perform testing, experimentation, and validation in support of product design.
  • Support team members in design, conducting experiments, data acquisition and analysis, troubleshooting, assembly and fabrication of prototypes and equipment.
  • Gain product development experience such as concept generation, circuit design, writing firmware and software, printed circuit board design and fabrication, system prototyping, testing and debugging hardware and software, and documentation.
  • Assist in developing laboratory testing, interpreting data results, and recommending next steps.
  • Responsibilities will increase with each rotation as you learn more by returning to school. Rotations are generally 3-4 months and availability for multiple rotations is desired. We offer a competitive wage and housing assistance to non-local students that live 50+ miles from the site. The R&D Co-op program provides each student with a great support system, as well as the opportunity to meet people from various schools throughout the country.
  • All co-ops that qualify for housing assistance will receive a one-time taxable stipend to support the cost of living during the co-op term. Prior to the start date all co-ops will be connected with other incoming co-ops and provided with housing resources to individually secure housing arrangements. Transportation is not provided; all co-ops are responsible for securing their own transportation to and from the site daily.
  • Qualifications - Required:
  • Be enrolled in an accredited College/Institution pursuing a Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, or a related field
  • Must have completed a minimum of two semesters in school prior to the beginning of the co-op term (class standing of a sophomore or above).
  • Considered a student during the co-op term, must not have a graduation date prior to the start of the co-op term.
  • Have a minimum GPA of 3.0
  • Must be legally authorized to work in the United States for the full duration of the co-op term.
  • Have demonstrated leadership/participation in campus programs and/or community service activities.
  • Interest in the Medical Device Industry
  • Basic knowledge and experience with:
  • Analog hardware design and analysis
  • Embedded Systems (Microcontrollers, Arduino, Raspberry Pi)
  • Circuit board and/or system troubleshooting
  • Making measurements using typical electrical laboratory equipment (Oscilloscope, Digital Multimeter, etc
  • MATLAB, Python, or equivalent scripting languages
  • Permanently authorized to work in the U.S., must not require sponsorship of an employment visa (e.g., H-1B or green card) at the time of application or in the future. Students currently on CPT, OPT, or STEM OPT usually requires future sponsorship for long term employment and do not meet the requirements for this program unless eligible for an alternative long-term status that does not require company sponsorship.
  • Qualifications - Preferred:
  • Knowledge and experience with:
  • Statistical analysis and/or Design of Experiments (Minitab, Weibull/Reliasoft, SAS, R)
  • Risk management
  • Designing product components and subsystems, familiarity with manufacturing processes and related design requirements and constraints
  • Schematic capture, circuit board design and fabrication (Altium, Cadence, KiCAD, etc).
  • Circuit simulation using LTSpice or other SPICE software
  • Embedded Systems such as coding in C/C++, VHDL, Verilog, and with peripherals such as Ethernet, USB, and busses such as I2C and SPI
  • Coding in LabVIEW, MATLAB, or Python for test automation and data post-processing
  • Previous Experience in the Medical Device Industry

Benefits:

  • Co-Ops/Interns may be eligible to participate in Company sponsored employee medical benefits in accordance with the terms of the plan.
  • Co-Ops and Interns are eligible for the following sick time benefits: up to 40 hours per calendar year; for employees who reside in the State of Washington, up to 56 hours per calendar year
  • Co-Ops and Interns may be eligible to participate in the Company’s consolidated retirement plan (pension)
  • For additional general information on Company benefits, please go to https://www.careers.jnj.com/employee-benefits
  • Permanently authorized to work in the U.S., must not require sponsorship of an employment visa (e.g., H-1B or green card) at the time of application or in the future. Students currently on CPT, OPT, or STEM OPT usually requires future sponsorship for long term employment and do not meet the requirements for this program unless eligible for an alternative long-term status that does not require company sponsorship.
  • Johnson & Johnson is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status or other characteristics protected by federal, state or local law. We actively seek qualified candidates who are protected veterans and individuals with disabilities as defined under VEVRAA and Section 503 of the Rehabilitation Act.
  • Johnson & Johnson is committed to providing an interview process that is inclusive of our applicants’ needs. If you are an individual with a disability and would like to request an accommodation, external applicants please contact us via https://www.jnj.com/contact-us/careers. Internal employees contact AskGS to be directed to your accommodation resource.

Required Skills:

  • Preferred Skills:

Qualifications

  • Be enrolled in an accredited College/Institution pursuing a Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, or a related field
  • Must have completed a minimum of two semesters in school prior to the beginning of the co-op term (class standing of a sophomore or above).
  • Considered a student during the co-op term, must not have a graduation date prior to the start of the co-op term.
  • Have a minimum GPA of 3.0
  • Must be legally authorized to work in the United States for the full duration of the co-op term.
  • Have demonstrated leadership/participation in campus programs and/or community service activities.
  • Interest in the Medical Device Industry
  • Analog hardware design and analysis
  • Embedded Systems (Microcontrollers, Arduino, Raspberry Pi)
  • Circuit board and/or system troubleshooting
  • Making measurements using typical electrical laboratory equipment (Oscilloscope, Digital Multimeter, etc
  • MATLAB, Python, or equivalent scripting languages
  • Permanently authorized to work in the U.S., must not require sponsorship of an employment visa (e.g., H-1B or green card) at the time of application or in the future. Students currently on CPT, OPT, or STEM OPT usually requires future sponsorship for long term employment and do not meet the requirements for this program unless eligible for an alternative long-term status that does not require company sponsorship.
  • Statistical analysis and/or Design of Experiments (Minitab, Weibull/Reliasoft, SAS, R)
  • Risk management
  • Designing product components and subsystems, familiarity with manufacturing processes and related design requirements and constraints
  • Schematic capture, circuit board design and fabrication (Altium, Cadence, KiCAD, etc).
  • Circuit simulation using LTSpice or other SPICE software
  • Embedded Systems such as coding in C/C++, VHDL, Verilog, and with peripherals such as Ethernet, USB, and busses such as I2C and SPI
  • Coding in LabVIEW, MATLAB, or Python for test automation and data post-processing
  • Previous Experience in the Medical Device Industry
  • Preferred Skills

Apply for this job in 1 click

Skip the repetitive application forms

Install the Base Career Chrome Extension and autofill job applications across major job boards with your profile.

Sarah M.James T.Maya R.

Trusted by over 500,000 job seekers on Base Career

Start Free Today

More from this employer

More jobs at Johnson & Johnson

HR Leader, Global Quality & Regulatory Affairs

Raynham, USA

Discovered TodayFull-time

Hospital Operations Specialist, Trauma

West Chester, USA

Discovered TodayFull-time

Technical Launch Manager -Orthopaedic

West Chester, USA

Discovered TodayFull-time

QC Incoming Inspector

, USA

Discovered TodayFull-time

Manager, Deliver Value Stream Lead (Duration Based)

Raritan, USA

Discovered TodayFull-time

Senior Manager, Health Care Compliance Officer

Jacksonville, USA

Discovered TodayFull-time

2nd Shift - Process Engineer III

Memphis, USA

Discovered TodayFull-time

Key Account Specialist, Rheumatology (Minnesota/North Dakota territory) – Johnson & Johnson Innovative Medicine

Minneapolis, USA

Discovered TodayFull-time